How to Choose an Automotive Clear Coat: Mix Ratio, Solids, Speed and Finish
Share
Choose a clear coat by four things printed on its technical data sheet: the size of the job it is made for, its mix ratio and solids, how soon it can be polished, and the finish it leaves. A speed clear that can be buffed in 25 minutes is made for spot and one-panel repairs. A 2:1 high-solids clear can need 16 to 24 hours before polishing. This guide compares 15 clears we stock, using the numbers each manufacturer prints.
Which clear coat is right for my job?
- One or two panels, same day: a speed clear. High Teck says its 8550 was "developed for spot repair and one panel repair."
- A whole car, 4:1 mix: a clear such as High Teck 8100, 7000, or 8720, or Matrix MS-52. High Teck calls 8720 a "premium quality overall clear."
- A whole car, 2:1 high solids: a clear such as High Teck 77125, Matrix MS-42, or Challenger CH3050. Challenger says CH3050 is "specifically designed for complete resprays and panel repairs over Challenger Basecoat."
- A matte finish: a flat clear. High Teck 77165 is "designed to produce a 5°-15° gloss level."
- No spray gun: a 2K aerosol such as SprayMax 3680061.
What is the difference between a 4:1 and a 2:1 clear?
The ratio is parts of clear to parts of activator. A quart of 4:1 clear takes 8 ounces of activator. A quart of 2:1 clear takes a pint.
Where the sheet prints a volume solids figure, the 2:1 clears in this guide come in higher than the 4:1 clears:
- 2:1 clears: Matrix MS-42 42.3%, High Teck 77125 42.05%, Matrix MS-20 41.8%, Challenger CH3050 41.8%.
- 4:1 clears: Matrix MS-30 31.8%, Matrix MS-52 30.7%, High Teck 8030 26.9%, High Teck 7000 25.59%.
Volume solids are the share of the mixed clear that stays in the film once the solvents evaporate. Use only the activator named on the sheet for that clear, at the ratio it gives.
Which clear coats dry the fastest?
| Clear | Mix ratio | Coats | Pot life or sprayable time | Polish or dry time, air dry |
|---|---|---|---|---|
| High Teck 8550 50-State Speed Clear | 4:1 | 3 light coats, no flash between | Pot life 30–45 minutes at 72°F | 25 minutes at 70°F |
| Matrix MS-30 Super Speed | 4:1 | 2–3 single wet coats | Sprayable 30–60 minutes at 77°F | 3 hours or more at 77°F |
High Teck describes 8550 as a "2.1 VOC (50-state compliant)" clear and says it "can be wet sanded and buffed after 25 minutes." The sheet adds that air-dry times may increase with insufficient airflow. Mix only what you can spray inside the pot life.
Which 4:1 clears work for a whole car?
| Clear | Mix ratio | Coats | Pot life or sprayable time | Polish or dry time, air dry |
|---|---|---|---|---|
| High Teck 8100 | 4:1 | 2 coats | Pot life 1 hour | 24 hours at 70°F |
| High Teck 8030 ECO Clear | 4:1 | 2–3 medium wet coats | Pot life 2 hours at 68°F | 12–24 hours at 68°F |
| High Teck 7000 Multi-Purpose | 4:1 | 2–3 medium wet coats | Pot life 1–2 hours at 77°F | 18–24 hours at 77°F |
| High Teck 8720 | 4:1 | 2–3 medium wet coats | Pot life 2 hours | 12 hours at 77°F |
| Matrix MS-52 Universal | 4:1 | 2–3 single wet coats | Sprayable 30–60 minutes at 77°F | 12–24 hours at 77°F |
| Latico 5860 | 4:1 | 2 normal coats | Pot life: 4 hours at 68°F | Dries in 7–8 hours at 68°F |
High Teck describes 8030 as "an economy clearcoat." Our 8030 listing notes that it is a value option made without specific UV-protectant materials, and that its lifespan varies with use and maintenance. If long-term durability matters most, pick another clear from this page.
High Teck says both 8030 and 8720 are "water white," which it says removes concerns about color change over a white basecoat.
Which 2:1 high solids clears do you stock?
| Clear | Mix ratio | Coats | Pot life or sprayable time | Polish or dry time, air dry |
|---|---|---|---|---|
| High Teck 77125 Glamour Clear | 2:1 | 2–3 single wet coats | Sprayable 30–60 minutes at 77°F (pot life 8–10 hours) | 16–24 hours at 77°F |
| Matrix MS-42 Premium High Solids | 2:1 | 2–3 single wet coats | Sprayable 30–60 minutes at 77°F | 16–24 hours at 77°F |
| Matrix MS-20 High Performance | 2:1 | 2–3 single wet coats | Sprayable 30–60 minutes at 77°F | 16–24 hours at 77°F |
| Kapci 6030 HS | 2:1, plus 5–10% Kapci 2K thinner | 1 light coat and 1 normal coat | Pot life 4 hours at 68°F | Dries in 14–16 hours at 68°F with 6035 Normal hardener |
| Challenger CH3050 Overall | 2:1 | 2–3 single coats | Pot life 3 hours at 77°F | 8 hours to light polish, 24 hours to heavy compound, at 77°F |
Challenger's sheet says, "Applying more than 3 coats is not recommended." We do not ship Kapci 6030 to 2.1 VOC states. Check your local rules before you order any clear.
How do I get a matte finish?
Use a clear made for it. High Teck 77165 Flat Finish Clear sets the gloss by its mix ratio with 7102 Medium Activator:
- 6 parts clear to 1 part activator for a flat finish
- 5 parts to 1 for an eggshell finish
- 4 parts to 1 for a semi-gloss finish
Three things on the 77165 sheet differ from a gloss clear:
- It "cannot be polished." The sheet calls for thorough preparation and cleaning for that reason.
- Apply 2 even wet coats, and let the first flash until the surface is completely dull.
- Forced drying is not recommended.
The sheet also says to mix or shake 77165 thoroughly before adding activator.
Can I clear coat without a spray gun?
Yes, for one or two parts. SprayMax 3680061 2K Glamour Clear is a two-component clear in an aerosol. SprayMax recommends it "for parts and repair refinishing." Its sheet gives these steps:
- Shake the can for 2 minutes.
- Take the red button from the cap and attach it to the pin on the bottom of the can.
- Set the can upside down on a firm, level surface and press down once with the heel of your hand.
- Shake for 2 more minutes.
- Apply 1 to 2 spray passes, with about 5 minutes of flash between them.
Once activated, the can has a pot life of 48 hours at 68°F. The hardener contains isocyanates, so wear the respirator and gloves the label calls for. Our guide to applying aerosol paint covers spray technique.
How warm does it need to be to spray clear coat?
Most of these sheets print a temperature figure:
- High Teck 7000, 77125, and 77165: "not recommended for use in temperatures below 65°F."
- Matrix MS-20, MS-30, MS-42, and MS-52: "not recommended for use in temperatures below 65°F."
- Kapci 6030 and Latico 5860: for best results, booth and paint temperature between 68°F and 77°F.
- Challenger CH3050: all crosslinking stops at 60°F.
The polish and dry times in the tables are stated at 68°F to 77°F. Expect longer times in a colder shop. See our guides to painting a car in cold weather and choosing reducer and activator speed.
Clear coat checklist
- Match the clear to the job size: speed clear for a panel, overall clear for a car.
- Read the mix ratio on the sheet and measure both parts in the same cup.
- Use the activator made for that clear.
- Apply the number of coats the sheet gives.
- Check the sheet for the basecoats the clear is approved over.
- Mix only what you can spray within the pot life.
- Wait the full polish time before you sand or buff.
- Several of these sheets say the product is for professional use. Follow the respirator, eye, and skin protection directions on each label and safety data sheet.
Clear coats at AutoColorOnline
Every clear in the tables links to its product page. You can also browse all automotive clearcoats, or put a full system together with Build Your Kit. For PPG OMNI MC270, MC260, and MC161, see our OMNI mixing ratios chart. For coat counts, see how many coats of basecoat and clear a car needs.